Tivoli Directory Integrator: Unable to install Fixpack

While trying to install the fixpack for Tivoli Directory Integrator I got the following message:

The reason was some incompatibility with the network share where the installation sources were located. They were mounted via NFS from an EMC Isilon SAN device. After we copied the installation sources from the EMC Isilon to a NetApp device and shared it from there, everything worked without problems.

Another solution would be to copy the installation sources to a local drive and start installation from here.

Unfortunately we were not able to find the root cause of the problem (means, the configuration issue on the EMC Isilon share).

IBM Connections: Connection to LDAP is lost after some time

Customer has connected IBM Connections (means: Websphere Application Server) to an Atos DirX directory. The federated repository has been configured as “CUSTOM” type. After starting the Deployment Manager everything works, and the local wasadmin user and also admin users from the LDAP can login successfully.

However after some time (about 5-10 minutes) neither the local nor the LDAP users can login to the Deployment Manager. After you restart the Dmgr it does work for some time again.

In the SystemOut.log you will find messages like that:

[codesyntax lang=”text”]

[/codesyntax]

In order to fix that issue I changed the following configuration in the WAS System Console:

  1. In admin console, navigate toGlobal security > Federated repositories > Manage repositories > <repository_id> > Performance
  2. Enable the check box of “Enable context pool”  and set context pool timeout to “180”Save the configuration and restart the server
  3. In this environment I was unable to save the settings of this page until I enabled also the two cache parameters at the bottom of this page.

So the page looked like that:

Clipboard01

IBM Connections 5: NextGen theme not displayed

After installation of IBM Connections 5.0 the new look & feel (NextGen UI) is not displayed. The UI still looks like the old 4.5 theme. In addition you find the following error in the SystemOut.log

The reason seems to be some stale data in the WAS temp directory. To solve the issue, shutdown the Connections servers and delete the content from the following directory:

{WAS Install Dir}/AppServer/profiles/AppSrv1/temp/{nodeName}

Then restart the servers again. The theme should now be displayed correctly.

 

IBM Connections: Installing Connections with LDAP user

If you are using a user from the LDAP for installing IBM Connections make sure that you are using the specified login name (e.g. “uid”) of that user and NOT the full distinguished name (DN). Otherwise you might have trouble with configuring FileNet (CCM) later.

While running “createGCD.sh” resp “createGCD.bat” you will get errors like that:

[codesyntax lang=”text”]

[/codesyntax]

If you try to open the Filenet Admin console via http://server.acme.com/ACCE you wil get the following error:

 

If you have already installed Connections with the wrong user name you can solve the issue by changing the user dn to the uid in the following locations:

  • J2C alias “connectionsAdmin”
  • j2C alias “filenetAdmin”
  • All roles in all WAS applications which have been set to the “wrong” username
  • All references to the user in the file “<Connections install dir>/config.properties”

Stop and start all Connections clusters and re-run “createGCD.sh” resp “createGCD.bat”. You now should be able to successfully complete the Filenet / CCM configuration.

Logviewer for Windows

If you work with products like IBM Connections, IBM Sametime etc. you need a tool to view all the Websphere logs without the need to manually open them one by one. I used Baretail if the log files were on a Windows server and Multitail for log files on Linux machines. What I missed was a tool which let me see both Windows and Linux log files together on my Windows workstation.

I just found Log Expert which seems to be exactly what I need. It lets you open files from your local disk, from a Windows file share or from a Linux server via SFTP. It has all the functionality of Baretail Pro and is completely free.

Sample of all the relevant log files of my IBM Connections 5 test system:

logexpert

IBM Sametime 9: Connection Problems to Sametime Video Manager

After installing the Sametime 9 Media Manager components I had problems to connect from the System Console to the Video Manager. E.g. you were unable to edit the default media manager policy as you got the error “AIDSC#####: Could not connect to Sametime Video Manager. Either VMgr is not installed or server is not up. Please retry after installing VMgr or starting it.”.

If you try to change settings for the Video Manager (e.g. adding the Video MCU information) you see the error “An error occurred while adding or editing this Video MCU”.

The problem here was, that the websphere admin user (in my case “wasadmin”) did not have the necessary roles. To solve that you need to connect to the Polycom DMA 7000 console.

The URL for the console is “https://[videomanagerhostname]:8443/dma7000/”. Use “admin” as the username and “admin” as the password to login.

Then choose “User -> Users” from the menu. You should now see a list of user IDs which are defined in the system. One of the should be “admin” and the other one your Websphere admin user (here: “wasadmin”).

Right-click on the “wasadmin” user and choose “Edit” and then “Associated Roles”. Add all three roles to the user so that it then looks like this screenshot:

Snap2

After clicking “OK”, the issue should be solved.

[Special thanks to Frank Altenburg]

Sychronize Google Contacts with Thunderbird

To synchronize Google Contacts with Thunderbird I used Google Contacts in the past. It seemed that this add-on no longer worked for me with the newest Thunderbird version. So I looked around a bit and found a replacement which seems to work fine: gContactSync. The reviews for that add-on state that there are some bugs which might lead in deleting contacts from Google randomly. However, I only use it one way (my primary source is Google and I only write to Thunderbird)  so it is not an issue for me.

Beweiskraft von Bildern

Hier mal ein Beispiel, welche Aussagekraft die vermeintlichen “Beweisbilder” in den Artikeln unserer Mainstreampresse so haben.

Dieser Artikel erschien auf der WDR-Seite als Begeleittext zum “Tagesgespräch” am 29.08.2014. Man beachte das Bild mit den Panzern und der Bildunterschrift “Russische Kampfpanzer fahren am 19.08.2014 noch unter Beobachtung von Medienvertretern in der Ukraine”:

 

2014083101

 

Wie man sieht erscheint das gleiche Bild auch als Vorspann zu einem Artikel in der “Welt” vom 28.08.2014 mit quellenangabe von “N24”, der dieses Bild scheinbar auch schon verwendet hat:

2014083102

Soweit, so gut. Nirgendwo wurde allerdings erwähnt, dass dieses Bild überhaupt rein gar nichts mit der Ukraine-Krise zu tun hat.

Denn: Das gleiche Bild musste am 29. Juni 2009 (also 5 Jahre zurvor!) schon mal herhalten. Damals waren diese Panzer Teil eines Manövers im Kaukasus:

2014083103

Früher, also in Zeiten vor der Mainstream-Propaganda hätte man in den Bildunterschriften wenigstens einen Hinweis wie “Archivbild” oder so gefunden. Heute wird es einfach unkommentiert abgedruckt, weil es ja gerade zu dem passt, was man uns suggerieren will.

Ich werde nun mal die Welt und den WDR anschreiben und um Stellungnahme bitten. Mal sehen was sie zu sagen haben.

 

Nachtrag:

Das Bild erfreut sich noch auf anderen Seiten anscheinend großer Beliebtheit: http://www.tineye.com/search/f88d4aea1a97dc3b8b94764b6665d1b25c303895/?sort=crawl_date&order=asc

Update 01.09.2014:

WDR5 hat geantwortet:

Sehr geehrter Herr Urspringer,

Sie erwarten zu Recht eine ausgewogene Berichterstattung, die auch unser Anliegen ist.

Doch trotz unseres Anliegens Bild und Textmaterial stets sorgfältig zu verwenden, ist uns dieses Mal leider ein Fehler unterlaufen. Den Fehler haben wir mittlerweile korrigiert. Wir bitten, dies zu entschuldigen.

Freundliche Grüße

Ihr WDR 5 Team

Das Bild wurde mittlerweile auf der WDR5-Seite ausgetauscht, gegen das folgende Bild:

2014090101

Leider sah ich mich daher gezwungen noch einmal an WDR5 zu schreiben:

vielen Dank.
Der Artikel hat ja nun ein neues Bild bekommen mit der Unterschrift “Russische Soldaten in der Ukraine”. Könnten Sie mir bitte noch verraten, an welchem Detail im Bild man erkennen kann, dass es sich hier
a, um die Ukraine
b, um einen russischen Soldaten
handelt?
Auch hier wird in der Bildunterschrift eine Behauptung aufgestellt, die nicht bewiesen werden kann. Ich muss noch einmal betonen, dass ich dies nicht als seriöse, ausgewogene Berichterstattung ansehe, wenn ohne Vorlage von Beweisen einfach Behauptungen aufgestellt werden.
Würden Sie mir da zustimmen?
Für ein Feedback schon mal vorab vielen Dank.
Update 01.09.2014 – Teil 2:
Und hier die neue Antwort von WDR5. Ich entnehme ihr, dass der Reporter vor Ort vermutlich sich hat den Ausweis des Soldaten zeigen lassen und dass es damit unstrittig bewiesen ist. Und damit erklärt WDR5 das Thema für beendet.

Sehr geehrter Herr Urspringer,

danke für Ihre kritischen Anmerkungen!

Zur Ihrer Mail möchten wir uns wie folgt äußern:

Wir verlassen uns bei den von uns verwendeten Bildern auf die Fotografen und Reporter, die vor Ort im Einsatz sind. Diese Zusammenarbeit beruht auf zum Teil jahrelange enge Zusammenarbeit. Den pauschalen Vorwurf, dass wir unseriösen Journalismus betreiben, müssen wir deshalb zurückweisen. Er entbehrt jeder Grundlage!

Es ist völlig unstrittig, dass russische Soldaten völkerrechtswidrig in der Ukraine stationiert sind (auf der Krim) oder im Donbass operieren.

– Einheiten russischer Soldaten sind gefangen genommen worden
– von Russland aus haben sogar ganze Konvois die ukrainische Grenze überschritten – ohne Erlaubnis der legitimen Regierung der Ukraine
– die russische Regierung hat eingeräumt, dass russische Soldaten in ihrer “Freizeit” in der Ukraine für russische Separatisten kämpfen.

Es wäre doch wohl Aufgabe eines souveränen Staats, seine Bürger davon abzuhalten, völkerrechtswidrig auf dem Territorium eines benachbarten Landes zu kämpfen und dabei Menschen zu töten, oder nicht? In demokratischen Ländern, wie beispielsweise in Deutschland, sind Einsätze in “privaten Kriegen” in jedem Fall strafbar. Dass die Regierung Putin nichts dergleichen unternimmt, spricht für sich.

Das sind die Fakten, die sie überall nachprüfen können. Sogar in russischen Medien, die i.d.R als sehr regierungstreu gelten, wenn man von kleineren Blogs u.ä. absieht.

Bitte haben Sie Verständnis, dass wir weitere Mails aus Zeitgründen nicht mehr beantworten können!

Mit freundlichen Grüßen

Update 04.09.2014:

Nun hat der WDR wohl die Faxen dicke und hat auch das zweite Bild (das nämlich einen russischen Soldaten im März 2014 auf der Krim zeigte) entfernt. “Den Austausch des Bildes mit einem Motiv aus März 2014 zum gegenwärtigen Ukraine-Konflikt hat leider zu Schlussfolgerungen geführt, die nicht von uns intendiert waren.” – Wie hatte mir der WDR noch mal geantwortet: “Wir verlassen uns bei den von uns verwendeten Bildern auf die Fotografen und Reporter, die vor Ort im Einsatz sind”

Urs-o-Log: RSS-Feeds nur für bestimmte Tags

Aus gegebenem Anlass, da mich jemand angeschrieben hat, der sich für politische Themen etc. auf meinem Blog nicht interessiert (was ich schade finde, aber ich muss das akzeptieren), sondern nur Informationen über technische Themen etc. möchte:

Wer sich für ein E-Mail-Abo eingetragen hat, der bekommt immer eine Nachricht bei allen Themen. Eine Alternative wäre einfach meinen RSS-Feed in einem Feed-Reader zu abonnieren und dabei speziell die Tags anzugeben, die von Interesse sind.

Die URL dafür lautet:

http://www.urspringer.de/feed/?tag=TAGNAME

Also zum Beispiel:

http://www.urspringer.de/feed/?tag=notes,domino,quickr,sametime,connections,websphere,windows

Ich hoffe damit auch die Leser zufrieden gestellt zu haben, die sich nur für spezielle Themen interessieren.